1050 Aluminum Plate
Alloy: 1050
Temper: O, H14, H16, H18, H24, etc.
Thickness : 0.2-10mm
Width: 20-2200mm
Length: 500-11000mm
Introduction
1050 aluminum plate contains more than 99.5% aluminum, making it one of the types of industrial pure aluminum. It offers high plasticity, excellent corrosion resistance, good electrical and thermal conductivity, but has relatively low strength.
The 1050 aluminum plate is commonly used in a variety of applications, including daily products, lighting fixtures, reflectors, decorations, chemical containers, radiators, electronic products, electrical appliances, stamped parts, and more. It is particularly suitable for industries requiring high corrosion resistance and good formability, but where strength requirements are not critical. Chemical equipment is one of its typical applications.
Advantages of 1050 Aluminum Plate
-
Excellent formability and processing characteristics.High corrosion resistance.Good electrical and thermal conductivity.
-
Long service life, low cost, and high recycling value.
-
Mature processing technology and competitive pricing compared to other aluminum alloys.
Complete product specifications with customization available.
Parameter
| Alloy | Si | Fe | Cu | Mn | Mg | Cr | Zn | Ti | Other | Al | |
| Single | Total | ||||||||||
| 1050 | 0.25 | 0.4 | 0.05 | 0.05 | 0.05 | -- | 0.05 | 0.03 | 0.05 | 0.15 | 99.50 min |
| 1060 | 0.25 | 0.35 | 0.05 | 0.03 | 0.03 | 0.05 | 0.03 | 0.05 | 0.15 | 99.60 min | |
| 1100 | 0.95 | 0.05-0.20 | 0.05 | -- | -- | 0.1 | -- | 0.05 | 0.15 | 99.0min | |
| 3003 | 0.6 | 0.7 | 0.05~0.20 | 1.0~1.5 | -- | -- | 0.1 | -- | 0.05 | 0.15 | Remainder |
| 5052 | 0.25 | 0.4 | 0.1 | 0.1 | 2.2-2.8 | 0.15-0.35 | 0.1 | -- | 0.05 | 0.15 | Remainder |
Quick Assessment for Suitability
-
Do you need excellent formability, corrosion resistance, or conductivity?
If your application involves deep drawing, humid environments, or conductive components, 1050 is an ideal choice.
-
Are your strength requirements moderate or low?
1050 aluminum plate has lower strength compared to alloy plates. For higher strength, we recommend using 3003 or 5052 aluminum plates.
-
Is cost-effectiveness a primary concern?
When basic performance requirements are met, 1050 offers excellent cost-effectiveness.
Packing & Delivery
1.Standard seaworthy export packing, wooden pallets with plastics protection for the coil and sheet;
2.The other packing can be made based on the customer requirement;
3. Normally, we have four layers of packing: wooden pallets hardboard, Kraft paper and plastic. And fill more desiccants into package.
